Stator & Flywheel Kit For Yamaha Grizzly 700 YFM700 2007-2008 3B4-81450-00-00
Brand Name: M MATI
Origin: Mainland China
For ATV Brand/Model: YamahaÂ
MPN :Â 3B4-81450-00-00Â Â 28P-81410-01-00 Â 28P-81410-01-00
Package :Â Â Flywheel Rotor x1Â Â Stator x1 Â Â Stator Cover Gasket x1
Placement on Vehicle:Â Â Generator
Warranty : 1 year
Condition:Â New
Flywheel Rotor & Stator w/ Gasket For Yamaha Grizzly 700 YFM700 2007-2008 3B4-81450-00-00 28P-81410-01-00
Fit for Yamaha ATV as Following
Grizzly 700 YFM700 2007-2008 （All Edition）
Â
💡 Professional Tips for a Successful Install:
-
1. Use Threadlocker (Critical): Always apply a medium-strength threadlocker (e.g., Blue Loctite) to the stator mounting bolts and the pickup coil screws. Engine vibrations can loosen these over time, causing severe internal damage.
-
2. Inspect the Wood ruff Key: When removing the old flywheel, inspect the woodruff key on the crankshaft. If it shows signs of wear or shearing, replace it immediately to ensure perfect ignition timing.
-
3. Clean the Mating Surfaces: Ensure the crankshaft taper and the flywheel center are clean and free of oil/grease before installation. A dry, clean fit ensures the flywheel stays locked in place.
-
4. Proper Torque Specs: Use a torque wrench to tighten the flywheel nut to the manufacturer's specified torque. Do not rely solely on an impact wrench, as it can over-stress the crankshaft.
-
5. Check the Regulator/Rectifier: A failed stator often damages the regulator/rectifier (and vice versa). We strongly recommend testing your regulator after installation to ensure it isn't overcharging your new components.
-
6. Dielectric Grease: Apply a small amount of dielectric grease to the electrical connectors to prevent corrosion, especially if you ride in muddy or wet conditions.
Original: $279.00
-65%$279.00
$97.65
Description
Brand Name: M MATI
Origin: Mainland China
For ATV Brand/Model: YamahaÂ
MPN :Â 3B4-81450-00-00Â Â 28P-81410-01-00 Â 28P-81410-01-00
Package :Â Â Flywheel Rotor x1Â Â Stator x1 Â Â Stator Cover Gasket x1
Placement on Vehicle:Â Â Generator
Warranty : 1 year
Condition:Â New
Flywheel Rotor & Stator w/ Gasket For Yamaha Grizzly 700 YFM700 2007-2008 3B4-81450-00-00 28P-81410-01-00
Fit for Yamaha ATV as Following
Grizzly 700 YFM700 2007-2008 （All Edition）
Â
💡 Professional Tips for a Successful Install:
-
1. Use Threadlocker (Critical): Always apply a medium-strength threadlocker (e.g., Blue Loctite) to the stator mounting bolts and the pickup coil screws. Engine vibrations can loosen these over time, causing severe internal damage.
-
2. Inspect the Wood ruff Key: When removing the old flywheel, inspect the woodruff key on the crankshaft. If it shows signs of wear or shearing, replace it immediately to ensure perfect ignition timing.
-
3. Clean the Mating Surfaces: Ensure the crankshaft taper and the flywheel center are clean and free of oil/grease before installation. A dry, clean fit ensures the flywheel stays locked in place.
-
4. Proper Torque Specs: Use a torque wrench to tighten the flywheel nut to the manufacturer's specified torque. Do not rely solely on an impact wrench, as it can over-stress the crankshaft.
-
5. Check the Regulator/Rectifier: A failed stator often damages the regulator/rectifier (and vice versa). We strongly recommend testing your regulator after installation to ensure it isn't overcharging your new components.
-
6. Dielectric Grease: Apply a small amount of dielectric grease to the electrical connectors to prevent corrosion, especially if you ride in muddy or wet conditions.
